Nice To-Max Instructions Et Avertissements Pour L'installation Et L'utilisation page 15

WHAT TO DO IF...
K The system sensitivity to obstacle detection is reduced:
– Clean the guides of the shutter to remove any imperfections and improve
shutter movement.
– Eliminate any mechanical blockages.
– Secure the motor and shutter to reduce possible oscillations and system
vibrations.
K The system operates in emergency "hold-to-run" conditions:
– Check that the motor is not subject to a significant electric or mechanical
shock.
– Check that all motor parts are intact.
– Repeat the installation procedure.
K The system sensitivity to obstacle detection is too high:
– Continue to press the same pushbutton to complete the manoeuvre.
– Perform two complete opening and closing cycles.
12 – English
All manuals and user guides at all-guides.com
As for the installation, the disposal operations at the end of the product's effec-
tive life must be performed by qualified personnel.
This product is made up of different types of material, some of which can be
recycled while others must be scrapped. Seek information on the recycling and
disposal methods envisaged by the local regulations in your area for this prod-
uct category.
Warning! – Some parts of the product may contain polluting or hazardous sub-
stances that, if incorrectly disposed of, could have a damaging effect on the
environment or on the health of individuals.
As the symbol on the left indicates, this product may not be dis-
posed of with the usual household waste.
It must be disposed of separately in compliance with the regula-
tions locally in force, or returned to the seller when purchasing a
new, equivalent product.
Warning! – Heavy fines may be imposed by local laws for the illegal disposal of
this product
PRODUCT DISPOSAL