Publicité
Les langues disponibles
Les langues disponibles
EN
EN
BATTERY TYPE BUTTON
Digital display
12V
24V
FUNCTION SELECTION BUTTON
Mode
NORMAL-5A
NORMAL-10A
BOOST-20A
REPAIR
ENGINE START (press ENGINE START BUTTON to enter)
Provides additional amps for cranking an engine with a weak or run-down battery.
WARNING: Always use in combination with a battery. Must NOT touch or disconnect clamps when ENGINE START mode works, otherwise there may be serious
injuries to people or property.
ERROR SITUATIONS
Digital display
Warning LED indicator
E01
WARNING
LED lit
E02
WARNING
LED lit
E03
WARNING
LED lit
5
LED indicator
STD LED lit
GEL LED lit
AGM LED lit
LITHIUM LED lit
STD LED lit
GEL LED lit
AGM LED lit
Explanation
Charging 12V Lead-acid & 12V Lithium Ion
Batteries (4-cell LiFePO4)and 24v Lead-acid batteries.
Charging 12V Lead-acid & 12V Lithium Ion
Batteries (4-cell LiFePO4)and 24v Lead-acid batteries.
Charging 12V Lead-acid & 12V Lithium Ion
Batteries (4-cell LiFePO4)and 24v Lead-acid batteries.
Charging 12V Lead-acid and 24v Lead-acid batteries.
Meaning
The connections are reversed.
Output current reduces to 0 when tem-
perature in charger is too high.
The battery cannot store electric charge
(dead battery).
WWW.NIKOLAOUTOOLS.GR
Description
(STANDARD)-Charged Voltage is 14.4V. When
charging, pressing this button does NOT work.
(GEL)-Charged Voltage is 14.5V. When charging,
pressing this button does NOT work.
(AGM)-Charged Voltage is 14.8V. When charging,
pressing this button does NOT work.
Charging 12V lithium-ion batteries only, including
(4-cell LiFePO4).
(STANDARD)-Charged Voltage is 28.8V. When
charging, pressing this button does NOT work.
(GEL)-Charged Voltage is 29V. When charging,
pressing this button does NOT work.
(AGM)-Charged Voltage is 29.6V. When charging,
pressing this button does NOT work.
SOLUTION
Change red and black clamps or ring terminals to
the correct battery posts
DO NOT remove the AC plug immediately. After
cooling down, the battery charger will work again.
Replace the battery with a new one or try the
REPAIR MODE.
Publicité
