Publicité
Les langues disponibles
Les langues disponibles
Figure 2C – Recommended instal lation
of the Saunum AirSolo Wall model using
a hanging strip.
1. Install the strips supplied with the
Device on the wall. Use anchors if
necessary.
2. Hang the Device on the wall mounted
strips. Make sure that the eyelets on
the back of the Device rest equally on
both slats. (If necessary, use a spirit
level to ensure that the Device is level.)
3. Check the Device for any external
damage. It is forbidden to use a
damaged Device!
4. Before using the Device, cover all un
covered openings using the specified
aluminum tape to do so.
32
Publicité
