INSTALLATION
NB! Read the Safety Information before
beginning installation (see pp 6–7)!
The Device is installed on the wall of the
steam room or behind the inner lining (if
the device is integrated into the wall, the
lining boards must be secured to the sheet
metal face of the air duct with weather
board clamps) (see Figures 1, 1A, 1B, 1C, 1D,
1E and 2, 2A, 2B, and 2C on the following
pages).
The air outlet of may not be obstructed
and sauna users must keep all body parts
(feet, arms, legs, hands, etc.) at least 20 in. /
500 mm away from the fan.
The discharged air flow must be able to
spread freely throughout the steam room.
Do not install shower heads or water
spray devices above the sauna climate
unit!
20
Figure 1
Dimensions of the Saunum
AirSolo 70 / 80 models.
BOTTOM VIEW
Cable opening
7.9 in. / 200 mm
4.2 in. / 106 mm
SIDE VIEW
5.5 in. / 139 mm
8.9 in. / 226 mm