Uline h-9790 Mode D'emploi page 6

8. Align U-brackets (B) with holes in desktop (1) and
return desktop using two M6 x 15 mm screws (D) to
secure each bracket. (See Figure 16)
Figure 16
9. Align L-brackets (G) and L-bracket covers (H)
with holes in modesty panel (4) and use two
M6 x 15 mm screws (D) to secure each bracket
and cover set. (See Figure 17)
Figure 17
PAGE 6 OF 18
L-DESK RETURN ASSEMBLY CONTINUED
B
D
4
D
H
G
10. Align L-brackets (G) with holes in desktop panel (1)
and use two M6 x 15 mm screws (D) to secure each
bracket. (See Figure 18)
Figure 18
G
11. Insert grommet caps (F) into desktop. (See Figure 19)
Figure 19
12. Adjust floor glides to compensate for uneven floors.
1-800-295-5510
uline.com
1
D
F
0922 IH-9790