Uline h-9790 Mode D'emploi page 4

A
Desktop Bracket x 2
E
Floor Glide x 2
1. Install floor glides (E) on return leg frame (6).
(See Figure 9)
Figure 9
6
E
2. Align return support bar (7) with holes on return
leg frame (6) and use three M6 x 20 mm bolts (C)
to secure. (See Figure 10)
Figure 10
7
C
PAGE 4 OF 18
L-DESK RETURN PARTS
B
U-Bracket x 2
F
Grommet Cap x 1
L-DESK RETURN ASSEMBLY
6
C
M6 x 20 mm Bolt x 7
J
Connector Plate x 2
3. Attach two desktop brackets (A) to return leg frame (6)
using two M6 x 20 mm bolts (C) per bracket.
(See Figure 11)
Figure 11
C
A
Determine whether L-desk will be set up for
right-hand or left-hand configuration. This will
impact how the return is assembled. Assembly
of a right-hand L-desk is shown in the following
figures. For left-hand L-desk configuration,
attach return support bar (7) to left side of
support bar (3).
D
M6 x 15 mm Screw x 24
K
M6 x 55 mm Bolt x 1
7
6
0922 IH-9790