Uline h-9790 Mode D'emploi page 5

4. Align return support bar (7) with hole in main support
bar (3). Use one M6 x 55 mm bolt (K) to secure.
(See Figure 12)
Figure 12
5. With second person, set main desktop (1) and
return desktop (5) panels on assembled frame.
(See Figure 13)
Figure 13
1
PAGE 5 OF 18
L-DESK RETURN ASSEMBLY CONTINUED
3
K
7
6. Use four M6 x 15 mm screws (D) to secure each
desktop bracket (A) to main desktop (1) and return
desktop (5) panels. (See Figure 14)
Figure 14
7. Attach connector plates (J) to main desktop (1) and
return desktop (5) panels with six M6 x 15 mm screws (D)
per plate. (See Figure 15)
Figure 15
5
9
A
D
J
D
0922 IH-9790