Berker 7574 01 01 Mode D'emploi page 27

Triggering a function, operating loads
Consumers, such as lighting, blinds, etc., are operated using the touch-sensi-
tive control surfaces, and are dependent on the device programming.
Each touch on the touch-sensitive surface can be confirmed by an acous-
tic signal when the button sound ON is switched on.
„ If the device is in standby mode, touch anywhere on the touch-sensitive
display area (1).
The last page/start page used is displayed.
If the proximity sensor in the menu
the display switches automatically to the last page/start page used upon
approaching.
„ Press a control surface in the display and functional area (9).
The stored function is executed.
The actuation pulse lasts for the duration of the actuation. Depending
on the function, short and long touches can trigger different actions, e.g.
switching/dimming or roller shutter/blind.
If no action is executed on the display within an adjustable time period, the
device returns automatically to standby display/to the screensaver – if this
is activated.
Setting device
Einstellungen System
Sprache Sprache der
„ Press control surface
Mo. 30.06.14 07:22
System editierbaren Texte
The display changes to the menu
Bildschirm Tastenton
„ Select submenu
„ With
tellungen System
each can be selected.
Einstellungen System Wecker
Einstellungen System
„ Press control surface for the parameter required.
Sprache Sprache der
Wecker
Wecker
System editierbaren Texte
The display changes to another page where you must select once again,
Weckzeit
or it changes directly to the setting of the parameter (Figure 5).
Seite 5
–
„ With
07 : 45
Bildschirm Tastenton
preset value (Figure 5) or with ON / OFF activate/deactivate the parame-
ter (Table 1).
„ With
The display returns to the previous menu level.
If the entries are not confirmed, with
menu level without saving. Using
previously as
All manuals and user guides at all-guides.com
Einstellungen System
Sprache Sprache der
in the top display row (8).
System editierbaren Texte
Bildschirm Tastenton
.
/ go to the next/previous page, on which up to 4 setting parameters
Wecker
EIN
EIN
Weckzeit
Seite 6 Seite 7
+
– +
/ decrease/increase the parameter value, with
07 : 45
Einstellungen
confirm the entry.
-
.
Einstellungen System
Sprache
System
Bildschirm
Einstellungen System
System
Sprache Sprache der
System editierbaren Texte
Sprache Sprache der
System editierbaren Texte
Bildschirm
Bildschirm Tastenton
the display returns to the previous
the display returns to a page preset
without saving.
is activated,
Einstellungen System
Sprache der Sprache
editierbaren Texte System
Tastenton Bildschirm
/ scroll to a
Tastenton
z
Sprache der
editierbaren Texte
Tastenton
27