AEG 6000 PURE Serie Notice D'utilisation page 54

Sensor Function
field
ON / OFF
1
Hob²Hood
2
Pause
3
-
4
/
-
5
6
- Timer display
FlexiBridge (Flexible Bridge)
7
PowerSlide
8
9
- Control bar
PowerBoost
10
Lock / Child Safety Device
11
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the indicator is on,
there is a risk of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators /
cooking zone is hot. They show the level of
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
54 ENGLISH
/ appear when a
Comment
To activate and deactivate the hob.
To activate and deactivate the manual mode of the func‐
tion.
To activate and deactivate the function.
To increase or decrease the time.
To set the timer function.
To show the time in minutes.
To switch between three modes of the function.
To activate and deactivate the function.
To set a heat setting.
To activate the function.
To lock / unlock the control panel.
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
The control panel comes on after you activate
the hob and goes off after you deactivate the
hob.
When the hob is deactivated you can only
see .