Setting The Time For Dimmer; Changing The Display Color - JVC KD-APD89 Manuel D'instructions

Category Indication
Color Sel
Color selection
Color Set
Color setting
Red
Green
Blue
Key Illum
Illumination switch
*
12 Depends on the "Dimmer" setting.

Setting the time for dimmer

• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
Follow steps 1 to 3 on page 27.
• In step 2, select "DISP."
• In step 3, select "Dimmer."
2
Select "Time Set."
3
Adjust the dimmer start time.
1
Turn the control dial to set the dimmer start
time.
¢
2
Press to select "To." Then, turn the
control dial to set the dimmer end time.
30
Item Setting, [reference page]
( : Initial)
Initial: All : Select your favorite display color for each source (or for all
Source; sources), [30, 31].
Color: Pale
— : Create your own colors, and select them for the display color,
[31].
Day Color : User color during the day time *
NightColor : User color during the night time *
00 — 11 : Initial: Day Color: 07, NightColor: 05
00 — 11 : Initial: Day Color: 07, NightColor: 05
00 — 11 : Initial: Day Color: 07, NightColor: 05
• Red : You can select the button illumination according to your
• Green preference.
4
You can select your favorite display color for each source
(or all sources).
• When
Setting the display color
1
2
.
12
.
12
Exit from the setting.

Changing the display color

is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
Follow steps 1 to 3 on page 27.
• In step 2, select "COLOR."
• In step 3, select "Color Sel."