Detaching and Assembling the
Storage Bins
Crisper and Crisper Cover
To remove the crisper compartment,
the drawer to full extension
up
, and pull straight out.
1
2
3
To install, slightly tilt up the front, insert the
drawer into the frame and push it back into
place.
To Remove the Crisper Cover
Slide the crisper compartment out slightly
lift the front of the cover
out
.
1
1
3
3
CAUTION
y Use both hands to assemble and
disassemble the crispers. The
compartments are heavy when filled with
food and may cause injury if dropped.
y Open the refrigerator door fully when
disassembling or reassembling the
crisper.
All manuals and user guides at all-guides.com
Water Tank
pull out
, lift the front
while removing the Fresh Zone drawer. Do not
remove the water tank or water leakage may
occur. The water tank is not a removable part.
Door Bins
The door bins are removable for easy cleaning
and adjustment.
1
,
, and pull it straight
2
Some bins may vary in appearance and will
only fit in one location.
HOW TO USE
Tank
CAUTION: You will see the water tank
To remove the bin, simply lift the bin up and
pull straight out.
To replace the bin, slide it in above the
desired support and push down one side at
a time until it snaps into place.
NOTE
CAUTION
y Do not apply excessive force while
detaching or assembling the storage
bins.
y Do not use the dishwasher to clean the
storage bins and shelves.
y Regularly detach and wash the storage
bins and shelves; they can become
easily contaminated by the food.
29