Publicité
Les langues disponibles
Les langues disponibles
E.When time reaches 0, the test result (F1-F6) appears on the display.
F1=Excellent F2=Good F3=Fair F4=below average F5= No Good F6= Poor
F.If the computer does not detect your current heart rate fi rst, pressing RECOVERY will not enter into
pulse recovery test. During the pulse recovery test, press RECOVERY to exit the test and return to the
stop status.
4.Pulse Measurement
Please place both your palms on the contact pads and the computer will show your current heart beat
rate in beats per minute (BPM) on the LCD after 3~4 seconds. During the measurement, heart icon will
fl ash with simulative ECG showing.
Remark: During the process of pulse measurement, because of the contact jamming, the measurement
value may not be stable when start, then it will return to normal level. The measurement
value cannot be regarded as the basis of medical treatment.
NOTE: If the computer is also equipped with wireless heart rate measuring via the transmitter belt, and
with hand pulse function, the hand-measurement-signal-detecting is preferred.
Specifi cations
Speed KM/H(M/H):
showing your current speed. Range: 0.0-99.9 KM/H(M/H).
RPM: showing the current rotate per minute. Range : 0-999.
TIME: the accumulative exercise time, range : 0:00-99M59S.
the preset time range is 5:00-99M00S. The computer will start to count
down from preset time to 0:00 with average time for each resistance
level. When it reaches to zero, the program will stop and computer
alarm. If you do not preset the time, it will run with one minute
decrement each resistance level.
DIST:
the exercise accumulative distance. Range : 0.0-99.9-999KM(MILE)
the preset distance range :1.0-99.0-999. When the distance reaches 0,
the program will stop and the computer will alarm.
CALORIE:
the exercise accumulative calories burnt. Range : 0.0-99.9-999
the preset calories range :10.0-90.0-990. When the calorie reaches 0,
the program will stop and the computer will alarm.
PULSE:
showing the exercise heart rate value.
Range:
30-240BPM(beat per minute)
RESISTANCE LEVEL: showing resistance level. Range:1-16
WATT:
show the exercise watt
BREAKDOWN DISPLAY
1. When the computer displays ERROR1, please check if the motor is good and if the motor
wires connect well.
2. When the computer displays ERROR2, please check if your hands contact the sensors well
as there no body fat signal detected.
AUDIO AMPLIFIER AND SPEAKER (IF HAVE)
Connect the audio input plug to the audio player, then turn on the audio switch that in the
right side of the computer. In that case, the audio can be in play.
NOTE: During play mp3 , the audio frequency is very near by the heart rate frequency,
so sometimes the heart rate will fl ash or get the wrong heart rate value it is
normal. so suggest not to use mp3 when measure the heart rate.
ADAPTOR
INPUT:
AC (The voltage depends on different country)
OUTPUT:
8VDC 500mA AC-DC ADAPTOR
All manuals and user guides at all-guides.com
- 42 -
Publicité
