Oase biOrb Notice D'emploi page 19

W A R N I N G
Danger of suffocation.
Keep plastic bags and small parts out of reach of
babies and young children.
Intended use
biOrb Heater Set, referred to as "unit", may only
be used as specified in the following:
• As a thermostat controlled aquarium heater.
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes
in the home (not for commercial use).
• Only operate with water at a water tempera-
ture of +4 °C to +35 °C.
INSTALLATION AND CONNECTION
N O T E
• Ensure that the heater is immersed in water
at least up to the minimum immersion depth
marking.
• The heater can be completely immersed in
water.
• It is important to use the supplied holder for
fitting the heater. Ensure that the heater does
not make contact with the acrylic wall of the
aquarium.
N O T E
The desired water temperature can only be
achieved if the heating capacity of the heater is
suitable for the volume of water in the aquar-
ium (→ Technical data) and is positioned in an
area with good water circulation.
How to proceed:
 B, C, D, E
• Turn the temperature controller to the de-
sired temperature value.
• Select one of the options for fastening the
holder in the aquarium.
- EN -
19