Heatcom HC 200 UNI Mode D'emploi Et Manuel D'installation page 5

DISPLAY
DISPLAY DESCRIPTION
1
"SV" the setpoint temperature. 1 decimal in 0,5° resolution.
"PV" the actual temperature measured. 1 decimal in 0,5°
2
resolution.
3
Showing the time of the day. 24h format.
Thermostat in "Auto" mode, controlling the temperature ac-
4
cording to the programmed time events.
Thermostat in manual mode, controlling the temperature only
5
according to the setpoint.
The thermostat is in "Auto" mode and the programmed time
6
event "Away" is active.
The thermostat is in "Auto" mode and the programmed time
7
event "Sleep" is active.
The thermostat is in "Auto" mode and the programmed time
7 + 8
event "Wake" is active.
The thermostat is in "Auto" mode and the programmed time
8
event "Home" is active.
9 The keyboard lock is active.
10 There is an active alarm.
11
Day of the week, 1=Monday....7=Sunday.
12 The thermostat is in "Safe-mode".
7 8 5 4 6 9
1
2
3
12
10
11
5