Heatcom HC 200 UNI Mode D'emploi Et Manuel D'installation page 3

INTRODUCTION
HC200 Uni has been developed by Heatcom to be used for many different
applications.
The thermostat is placed directly in the power outlet indoors or outdoors, and
the heat source can be plugged directly into the thermostat's Schuko power
outlet.
Alternatively, it is possible to install the heat source without a plug behind the
thermostat.
The included temperature sensor is already fitted with a 3 m cable and can be
placed where the temperature needs to be regulated.
Frost protection can be managed without any adjustment of the thermostat,
just place the sensor and connect the heat source.
The thermostat can be used both for frost protection and for controlling heat-
ing in, for example, greenhouses, orangeries or outbuildings. Here, program-
ming with 4 daily events offers great advantages.
3