Télécharger Imprimer la page

KitchenAid KSMSIA Manuel Du Propriétaire page 3

Masquer les pouces Voir aussi pour KSMSIA:

Publicité

Les langues disponibles

Les langues disponibles

8. Turn the appliance off (Off/0), unplug from outlet and detach
the attachment from appliance before cleaning and when not in
use. Turn the appliance off (Off/0) and make sure the motor
stops completely before putting on or taking off parts.
9. Allow the appliance to cool completely before putting on or
taking off parts, and before cleaning the appliance.
10. Blades are sharp. Handle Carefully.
11. Also see the Important Safeguards section included in the
Stand Mixer Owner's manual.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
PRODUCT USAGE
The Shave Ice Attachment is compatible with all household KitchenAid Stand Mixers. Set the
Blades to Shave Ice as per requirement.
NAME
Coarse Shave Blade
Fine Shave Blade
NOTE: For detailed instructions on swapping blades, please see "Changing the Blade"
section.
TEMPERING THE ICE PUCKS
Tempering Ice means allowing the ice to adjust at room temperature until it develops a glossy,
wet look and is clear from all sides. Tempering is an important step for producing the lightest
and fluffiest Shave Ice. Many factors determine the amount of time it takes to temper. In most
cases, your ice puck should be ready to use in 10 minutes or less.
NOTE: Ice pucks made with plain water require tempering. For mixed base recipes, refer to
the recipe details for tempering instructions.
The Ice Molds are used for best performance for both coarse and fine shaving. It's easy to get
shave ice from tempered ice out of the molds.
TIP: For the fluffiest Shave Ice, we recommend tempering the ice puck for 10 minutes, and
then using the Fine Shaving Blade.
ICE PUCK PREPARATION
1.
Fill the ice mold with water or flavored ice base mixture of your choice.
NOTE: To keep the mold from overflowing while freezing, be sure not to fill past the fill line
visible just below the rim of the mold.
2.
Affix the lid to the top of the mold and place it in the freezer for 12 to 24 hours.
NOTE: Freezing time may vary and will depend both on the temperature of your freezer as
well as the sugar or alcohol content of your mixture.
ICON
INTENDED USE
For coarser ice
shaving / ice chips.
For a fine, fluffy,
shaving texture.
snow-like ice
SPEED
10
3

Publicité

loading