Dell K803N Démarrage page 16

Installing the UPS Front Cover
Install the UPS front cover.
13
Connecting the Equipment
If you plan to use Dell UPS Management Software, connect your computer to the USB port using
1
the supplied cable.
If your rack has conductors for grounding or bonding of ungrounded metal parts, connect the
2
ground cable (not supplied) to the ground bonding screw.
If an emergency power-off (disconnect) switch is required by local codes, see "Installing Remote
3
Emergency Power-off" (REPO) in the Dell Online Rack UPS 2700W User's Guide.
Plug the equipment to be protected into the UPS output receptacles, but do not turn on the
4
protected equipment.
NOTE:
Verify that the total equipment ratings do not exceed the UPS capacity to prevent an overload alarm.
14
Installation and Startup
All manuals and user guides at all-guides.com