Doro 610 Mode D'emploi page 6

Caller Identification
The display shows you who is calling and the 10 most recent missed callers.
New Caller ID is indicated by
If the same number calls in more than once it will be saved as only one entry.
This function requires a subscription from your service provider.
This telephone will not display the time and date of the call.
Retrieving and Dialling CID Numbers.
1. Repeatedly press
2. Press to dial the displayed number, or press
q
Erasing Numbers
1. Repeatedly press
2. Press and hold
Erasing All Numbers
5
Press
º º
0
Messages
Apart from showing phone numbers, the display may show the following:
*Network Voice Mail can be cancelled from the display by pressing
Settings
1. Press .
P
2. Press button according to list below, e.g.
3. The display shows current setting, e.g. P-4
setting 2 out of 3.
4. Press corresponding digit for desired setting, e.g.
5. Press
to confirm.
º
Button
..................................... Handset Volume (1=min....3=max)
4
..................................... Ringer Melody (1=type 1....6=type 6)
5
..................................... Ringer Volume (1=min....3=max)*
6
..................................... Reset (Enter PIN-code, 0000 when supplied)
9
..................................... Recall Button Timing (2=100ms/normal, 6=300ms)
R
..................................... Tone/Pulse Dialling (1=pulse, 2=tone/normal)
*
*To turn the ringer on/off, in standby press and hold
 in standby mode.
 until the required telephone number is displayed.
 until the required telephone number is displayed.
until a beep is heard.
C
.
No information was received, e.g. international call, secret
or blocked numbers (not stored).
The number is longer than the display size (>12 digits).
Network Voice Mail*.
Function
English
to return to standby mode.
C
for handset volume.
4
2 ┘ 3 means commando 4, current
for max.
3
* (

º º
0 #
= ringer off).
.