Publicité
EN
Table of content
General instructions
Area of application
1 Components of Differential Pressure Measuring Kit
2 Setup of differential pressure manometer
Fig. 367
3 Functional test primary check valve and bleed valve
3.1 Assembly of the testing device
3.1 Functional test (primary check valve)
3.2 Functional test (bleed valve)
4 Functional test secondary check valve
4.1 Assembly of the testing device
4.2 Functional test (secondary check valve))
Fig. 368
3 Functional test primary check valve and bleed valve
3.1 Assembly of the testing device
3.2 Functional test (primary check valve)
3.3 Functional test (bleed valve)
4 Functional test secondary check valve
4.1 Assembly of the testing device
4.2 Functional test (secondary check valve)
Fig. 360
3 Functional test primary check valve and bleed valve
3.1 Assembly of the testing device
3.1 Functional test (primary check valve)
3.2 Functional test (bleed valve)
4 Functional test secondary check valve
4.1 Assembly of the testing device
4.2 Functional test (secondary check valve)
Fig. 365
3 Functional test primary check valve and bleed valve
3.1 Assembly of the testing device
3.2 Functional test (primary check valve)
3.3 Functional test (bleed valve)
4 Functional test secondary check valve
4.1 Assembly of the testing device
4.2 Functional test (secondary check valve)
Fig. 361
3 Functional test primary check valve and bleed valve
3.1 Assembly of the testing device
3.2 Functional test (primary check valve)
3.3 Functional test (bleed valve)
4 Functional test secondary check valve
4.1 Assembly of the testing device
4.2 Functional test (secondary check valve)
5 Maintenance
4 /40 – K410036099003-00 / 01.2023 – © www.kemper-group.com
About this manual
4
General instructions
The KEMPER Differential Pressure Measuring Kit must only be used
4
after reading this operating instructions. This document contains
information about the items, installation, function and operation of
5
the product. If any additional information is required, please contact
our Headquarter. You find the contact on the last page. Keep this
14
operating instructions always in the case of the KEMPER Differential
Pressure Measuring Kit.
Warnings
Be sure to read and follow the warnings in the manual. Failing to do
15
so can lead to personal injury or material damage!
16
17
Warning! Indicates hazards that may lead to injury,
material damage or contamination of drinking water.
18
Note! Indicates hazards that may lead to damages to
19
the system or malfunctions.
Area of application
20
•
For annual maintenance of the KEMPER Backflow Preventer
21
figure 360 and 361, according to DIN EN 806-5.
22
•
To check the safety and function of the Backflow Preventer
according to DIN EN 12729.
23
24
•
Also suitable for the maintenance of all Safety Valves according to
DIN EN 1717, especially the Filling-Combination Valve figure 365.
Planning target:
Protection of drinking water, minimize risks
25
26
27
28
29
30
31
32
33
34
34
35
36
37
38
39
Publicité
