Shure AXIENT AXT630 Mode D'emploi page 10

Specifications- AXT630, AXT631 Antenna
Distribution System
Dimensions
Weight
Housing
Operating Temperature
Range
Storage Temperature Range
Power Requirements
Current Drain
RF Input
Connector Type BNC
Configuration
Unbalanced, active
Band Filters
Impedance 50 Ω
Bias Voltage 12 V DC, 150 mA (300 mA maximum)
RF Frequency Range
Antenna In Cascade Out
50 50
Ω Ω
0 dB
All manuals and user guides at all-guides.com
44 mm x 483 mm x 366 mm (1.7 in. x
19.0 in. x 14.4 in.), H x W x D
4.6 kg (10.1 lbs),
Steel; Extruded aluminum
-18°C (0°F) to 63°C (145°F)
-29°C (-20°F) to 74°C (165°F)
100 to 240 V AC, 50-60 Hz
1.0 A RMS (referenced at 120 V AC)
AXT630: Wideband: 470–698 MHz
Band G1:
470–530 MHz
Band H4:
518–578 MHz
Band J5: 578–638 MHz
Band L3: 638–698 MHz
AXT631:
Wideband:
606–814 MHz
Band K4E: 606–666 MHz
Band M8: 666–730 MHz
Band P8,
710–790 MHz
P9:
Band Q5:
740–814 MHz
AXT 630:
470–698 MHz
AXT 631: 606–814 MHz
AXT 630/ AXT631 Circuit Diagram
-3.5 dB
() Denotes gain when cascade is disabled
Passive Splitter
-3.5 dB
(Cascade Bypass)
AXT630/AXT631 Circuit Diagram
Distribution Output
Connector Type
Configuration
Impedance
Gain Adjustment Range
Output Intercept Point
Cascade Output
Connector Type
Configuration
Impedance
Insertion Loss
Networking
Power Over Ethernet (PoE)
Network Interface
Network Addressing
Capability
Firmware Updates
Firmware is embedded software in each component that controls functional-
ity. Periodically, new versions of firmware are developed to incorporate ad-
ditional features and enhancements. To take advantage of design improve-
ments, new versions of the firmware can be uploaded and installed using
the Firmware Update Manager tool available in WWB6 software. Firmware
is available for download from http://www.shure.com.
Distro Out 1
50
Ω
-15 dB to 0 dB
(-12 dB to +3 dB)
Passive Splitter
Filter 1
Filter 2
User Gain Adjust
Filter 3
Filter 4
Wide Band
6
BNC (4 pairs)
Unbalanced, active
50 Ω
Cascade Enabled:
Cascade
Disabled:
>25 dBm, typical
BNC (1 pair)
Unbalanced, wideband
50 Ω
<5 dB
50 V DC, Class 1
Dual Port Ethernet 10/100 Mbps
DHCP or Manual IP address
Distro Out 2 Distro Out 3
50 50
Ω Ω
-15 dB to 0 dB -15 dB to 0 dB
(-12 dB to +3 dB) (-12 dB to +3 dB)
Passive Splitter
Passive Splitter
-15 dB to 0 dB
(In 1 dB steps)
-12 dB to +3 dB
(In 1 dB steps)
Distro Out 4
50
Ω
-15 dB to 0 dB
(-12 dB to +3 dB)