Delete Files; Write-Protection - Num'axes PIE1044 Guide D'utilisation

The OFF mode is the "safe mode" for actions such as: replacing the SD card or batteries, or
transporting the camera.
You will also use the OFF mode if you connect the camera to a computer's USB port later to
download your photos/videos.
7.3. Photo/video playback on the LCD screen
- Slide the switch to the SETUP position then press the MODE button 3 times to go to
the Playback mode.
- Press the  and  buttons to navigate the recorded photos/videos.
- Press the OK button to start a video then press the OK button again to stop it.
7.4. Watch the photos in slideshow mode
This function can be used to view the pictures stored on the memory card automatically as a
slide show. Each photo is displayed for about 2 seconds.
- Slide the switch in the SETUP position.
- Press the MODE button 3 times to go to the Playback mode then press and hold the
 button.
- A menu appears on the LCD screen.
- Select "Activate slideshow" and press the OK button.
- To stop the slideshow and keep the current picture on the screen, press the OK
button.

7.5. Delete files

- Slide the switch to the SETUP position.
- Press the MODE button 3 times to go to the Playback mode then press and hold the
 button.
- A menu appears on the LCD screen.
- Select "Delete selection" (deletes only the selected photo/video) or "Delete all files"
then press the OK button.
- Select "Cancel" or "Delete" then press the OK button.
- Press the MODE button to exit.

7.6. Write-protection

This function can be used to protect some of the recorded files from accidental deletion.
- Slide the switch to the SETUP position.
- Press the MODE button 3 times to go to the Playback mode then press and hold the
 button.
- A menu appears on the LCD screen.
PIE1044 - Indice B – Mars 2020 23/66