Num'axes PIE1044 Guide D'utilisation page 20

Video length
Audio recording
PIR interval
Side PIR sensors
PIR sensitivity
Working timer
PIE1044 - Indice B – Mars 2020
Default setting: 10 seconds
Programmable from 3 seconds up to 10 minutes
(by 1-second increments from 03 up to 59 seconds / by 1-minute
increments from 1 up to 10 minutes)
ON / OFF
Allows you to activate or deactivate the audio recording on the
videos.
Default PIR interval: 20 seconds
Programmable from 3 seconds up to 60 minutes
(by 1-second increments from 03 up to 59 seconds / by 1-minute
increments from 1 up to 60 minutes)
Allows you to set the desired time interval between photos/videos
when motion is detected. This function avoids taking too many
photos / videos.
Example: if the PIR interval is set to 01 minute, the camera will
wait 1 minute between each photo/video recording even if motion
is detected.
ON / OFF
Allows you to activate or deactivate the side PIR sensors.
Low / Medium / High
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference
between body heat and outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and
environment temperature are hard to tell by the camera, the
recommended setting is high.
In environments with lots of interference like hot wind, smoke,
near window, etc., the recommended setting is low.
ON / OFF
The camera can be set to take photos/videos only at a certain time
of the day. Each day, the camera will work only during the user set
time period. The rest of the time, the camera will be in stand-by
and will not record any triggers by movement.
Select "ON" then press "OK" to set the start time and end time of
the desired working period (Hr:Min).
20/66