Num'axes PIE1044 Guide D'utilisation page 21

Time Lapse
Language
Time & Date
Time stamp
Password
Beep sound
Format memory card
PIE1044 - Indice B – Mars 2020
Example: If the "Working timer" is set to 15:00-18:00; the camera
will work only between 15h00 (03:00 PM) and 18h00 (06:00 PM)
each day.
This function can be set to "OFF" which means the camera works
all day.
ON / OFF
Programmable from 00:00:03 to 23:59:59.
With "Time Lapse" ON, the camera will capture photos or videos
automatically at a preset time interval regardless of whether
motions are detected or not.
WARNING: when the Time Lapse parameter is set to ON, the PIR
sensors are deactivated.
Select "ON" then press "OK" to set the interval; the camera will
capture photos/videos automatically upon the user set interval.
Example: if Time Lapse is set to 00:30:00, the camera will
automatically capture photos/videos every 30 minutes.
English / Deutsch / Dansk / Suomi / Svenska / Español / Français /
Italiano / Nederlands / Portugués / Chinois / Japonais
Time & Date setting
20/11/2019
Time format
24 hours
Date format
dd/mm/yyyy
NOTE: it is important to set the date and time to ensure some
functions work as expected (for example: time stamp on the
photos, operation during a defined time period).
Time & Date / Date / OFF
Select "OFF" if you don't want the date and/or time of the image
capture imprinted on every photo.
ON / OFF
Select "ON" then press "OK" to enable password protection for
your camera (4 digits between 0 and 9).
ON / OFF
You can choose to hear a beep sound or not when you press a
button.
Yes / No
Formatting the SD card in the trail camera before using it for the
15:57
12 hours
yyyy/mm/dd mm/dd/yyyy
21/66