Oreck AirInstinct AIR109 Guide D'utilisation page 12

All manuals and user guides at all-guides.com
Replacing the Filters
IMPORTANT: Always remove the protective plastic
packaging from the filter before installing the filter.
1. Unplug the air purifier.
2. Open the Cover by gently pulling from the bottom
corners.
3. Press the two hooks above the Pre-Filter, pull straight
out of the Cabinet. Thoroughly rinse the pre-filter
and let it air dry before placing it back in the cabinet.
Note: Do not use heated or compressed air as part
of the drying process.
4. Remove the used Odor Filter and HEPA filter. Note:
Do not dispose of the odor filter's plastic frame.
5. Remove the plastic bag from the filters.
6. Place the filters back in the Cabinet in the following
order: HEPA filter, Odor filter, and Pre-Filter.
Note: Insert Odor Filter into its plastic frame
before inserting into the unit.
2
12
6
5
3
4