Sony Bravia KD-85XH80 Série Guide De Référence page 6

KD-85XH80xx / 75XH80xx / 65XH81xx /
65XH80xx / 55XH81xx / 55XH80xx
1
Remove the screws from the rear of the
TV.
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of the
TV (to make it parallel with the wall).
Note
• If using an electric screwdriver, set the torque at
approximately 1.5 N.m {15 kgf.cm}.
• Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV.
Use only a flat head screwdriver to install the Wall-
Mount Attachment. Use of another tool might result
in over torqueing the Wall-Mount Attachment and
damaging the TV.
6
GB
VS
1.5 N·m
{15 kgf·cm}
Detaching the Table-Top Stand from the TV
KD-85XH80xx / 75XH80xx / 65XH81xx /
65XH80xx / 55XH81xx / 55XH80xx
1
Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
2
Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
• Three or more people are required to detach the
Table-Top Stand.
• Be careful not to use excessive force while detaching
the Table-Top Stand from the TV as it may cause the
TV set to fall resulting in personal injury or physical
damage to the TV.
• Take care when handling the Table-Top Stand to
prevent damage to the TV.
• Be careful when lifting the TV as the Table-Top Stand
is detached, the Table-Top Stand may topple over and
cause personal injury.
• Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.