Philips SPEECHMIKE LFH3210 Manuel De L'utilisateur page 9

4 Use your SpeechMike
This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1 Create a recording
The dictation microphone must be
1
connected to the computer with the USB
cable.
Start SpeechExec dictation software.
2
Move the slide switch to the
3
create a new recording and start speaking.
• The recorder window is displayed.
• The record indicator light glows in red (in
overwrite mode) or green (in insert mode)
while recording.
To stop recording, move the slide switch to
4
the position.
f
Press the
5
• E OL/• • P RIO
recording as finished.
• The dictation file is moved to the
dictations folder.
• The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
6
press the
• E OL/• • P RIO
a second.
D Note
For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to 6
inches) away from your mouth.
User manual
position to
REC
key to mark the
Finished
key again within half
4.2 Use the bar-code scanner (LFH3310
only)
Press the scan button and scan the
1
barcode. When a barcode is recognized,
the SpeechMike will beep and the barcode
information is inserted into the currently
active application as if the barcode number
is typed in digit by digit.
D Note
The barcode scanner allows barcode scanning
from a distance of up to 30 cm / 12 inches.
9