Braun 7 Serie Mode D'emploi page 20

All manuals and user guides at all-guides.com
Trouble-Shooting
Problem: Possible reason:
SHAVER
Unpleasant 1. Shaver head is
smell from the cleaned with water.
shaver head. 2. Cleaning cartridge is
in use for more than
8 weeks.
Battery 1. Foil and cutter are
performance worn which requires
dropped more power for each
significantly. shave.
2. Shaver head is
regularly cleaned with
water but not
lubricated.
Shaving 1. Foil and cutter are
performance worn.
dropped 2. Personal setting of
significantly. shaving performance
has been changed.
3. Shaving system is
clogged.
Shaver turns off Foil and cutter are worn
after 1 minute which requires more
shaving time power than the motor
with fully can deliver. The
charged battery. appliance turns off.
Battery Foil and cutter are worn
segments in the which requires more
display are power for each shave.
skipped with
decreasing
battery capacity.
Shaving parts Reset button has not
have been been pushed.
changed recently
but replacement
symbol lights up.
20
Remedy:
1. When cleaning the shaver head
with water only use hot water
and from time to time some
liquid soap (without abrasive
substances). Remove foil &
cutter cassette to let it dry.
2. Change cleaning cartridge at
least every 8 weeks.
1. Renew foil & cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil
once a week for lubrication.
1. Renew foil & cutter cassette.
2. For a thorough and fast shave
we recommend the «+»
(intensive) setting.
3. Soak the foil & cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
machine oil on the foil.
– Renew foil & cutter cassette.
– Regularly oil the shaving
system, especially when
cleaning with water only.
– Renew foil & cutter cassette.
– Regularly oil the shaving
system, especially when
cleaning with water only.
– Push the reset button for at
least 3 seconds to reset the
counter.