Password In Parental Control; Oss Notice; Other Information - JVC LT-32HA48U Guide D'utilisation

Chapter 6
2. Press ▲/▼ to select Connection test, then press
OK/► to check the Internet connectivity. If it
does not work, follow step 3 below.
3. Select Options > Ethernet network >
Configuration > IP setting then press OK/► to
enter the IP setting menu. You can set Address
type to Auto or Manual.
- Select Auto if you want the TV to acquire and
enter the needed IP address automatically.
- Select Manual if you want to enter your IP
address manually, then:
• Press ▼ to go to the first entry field.
• Enter the IP address, Subnet mask, Default
gateway, Primary DNS and Secondary DNS
values. Use the alphanumeric buttons to enter
numbers and the arrow buttons to move from
one entry field to another.
- Once Auto or Manual IP setting is completed,
press Menu to go back, press ▲/▼ to select
Connection test, then press OK/► to check the
Internet connectivity again.
Chapter 6 - Other information

Other information

Password in Parental Control

- The default password is 1234. You can change it to
a new one.
- The super password is 0423. If you forget your
code, enter the super password to override any
existing codes.

OSS Notice

This product uses software library from Freetype
Project.
This product uses software library which is distributed
under the zlib license.
This product uses UNICODE software programmes
which are distributed under IBM Open source license.
This product uses glibc software programmes which
are distributed under the GNU license.
EN 15
Other information