OHAUS 2000 Serie Mode D'emploi page 7

4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.
5.TECHNICAL DATA
The technical data is valid under the following conditions:
•
Indoor use only
•
Ambient temperature: -10°C to 40°C / 14°F to 104°F
•
Relative humidity: Maximum relative humidity 80% for temperatures
up to 31°C decreasing linearly to 50% relative humidity at 40°C.
•
Altitude: up to 2000 m
•
Mains supply voltage fluctuations: up to ±10% of the nominal voltage
•
Installation category: II
•
Pollution degree: 2
•
Protection class: III
Indicator
Capacity
Maximum Displayed Resolution
Power
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
12V, 1A AC adapter with internal rechargeable lead acid battery, 80 hours continuous use
Scan QR Code with your WebCam for downloading the user instruction manual.
T24PE
up to 20,000 kg
1:20,000
with 12 hour recharge time
EN-5