Publicité
Les langues disponibles
Les langues disponibles
Install Hopper Handle
1. Install hopper handle as shown in Fig. 6.
HOPPER HANDLE (1)
PGC24-12
Grease Bucket
1. Hang grease bucket from tube as shown in Fig 7.
ASH CUP
Ash Cup
1. Install Ash Cup as shown in Fig 8. Never use grill without
Ash Cup in place.
Install Deflector and Drip Tray
1. Install the Heat Deflector and Drip Tray as shown in Fig 8
and Fig 9.
All manuals and user guides at all-guides.com
M6 RUBBER WASHER (2)
M6 FENDER WASHER (2)
M6 LOCK WASHER (2)
M6 X 15 BOLT (2)
Fig. 6
GREASE BUCKET
Fig. 7
DRIP TRAY
HEAT DEFLECTOR
Fig. 8
Warming Rack and Cooking Grate (Optional Rack Model
PG24-1 Not Included)
1. Install the Warming Rack and Cooking Grate as shown in
Fig 10.
Clean-out Knob Assembly Installation
Hand tighten the burner clean-out knob as shown in Fig 11.
Clean-out Port Knob
1. Clean-out Port knob must be pushed in when grill is on.
Make sure pullout lock is pushed down and locks the
knob to prevent inadvertent opening of the clean-out port.
See Fig 12.
DRIP TRAY
HEAT DEFLECTOR
Fig. 9
PG24-1 (OPTIONAL)
WARMING RACK
(NOT INCLUDED)
PG24-70 (2)
COOKING GRATE
Fig. 10
PG24-9 (1)
BURNER PULLOUT KNOB
Fig. 11
Fig. 12
CLEANOUT PORT CLOSED
Publicité
