Télécharger Imprimer la page

Saba LSS1016MI17W Mode D'emploi page 34

Publicité

Les langues disponibles

Les langues disponibles

Notes:
If the machine has outlet hose support, please install it like the
following pictures.
GB
When installing outlet hose, fix
It properly with a rope.
Position outlet hose properly
so that the floor will not be
damaged by water leakage.
Electrical Connection
• As the maximum current through the unit is 10A when you
are using its heating function, please make sure the power
supply system (current, power voltage and wire) at your home
can meet the normal loading requirements of the electrical
appliances.
• Please connect the power to a socket which is correctly
installed and properly earthed.
• Make sure the power voltage at your place is same to that in
the machine's rating label.
• Power plug must match the socket and cabinet must be
properly and effectively earthed.
64
Trough
Hose Retainer
Blind
Max. 100cm
Min.60cm
If outlet hose is too long,
do not force it into washer
dryer machine as it will cause
abnormal noises
• Do not use multi-purpose plug or socket as extension cord.
• Do not connect and pull out plug with wet hand.
• When connecting and pulling out the plug, hold the plug
tightly and then pull it out. Do not pull power cord forcibly.
• If power cord is damaged or has any sign of being broken,
special power cord must be selected or purchased from its
manufacturer or service center for replacement.
1. This machine must be earthed properly. If there is any short
circuit, earthing can reduce the danger of electrical shock.
This machine is equipped with power cord, which includes
plug, earthing wire at earthing terminal.
2. Washer dryer machine shall be operated in a circuit separate
from other electrical appliances. Otherwise, power protector may
be tripped or fuse may be burned out.
GB
65

Publicité

loading