PANCONTROL PAN 188 Manuel D'instructions page 39

Auto power off
The meter turns off automatically after 15 minutes
Data transfer
This function allows you to upload measured values to a computer to view, save
or analyze them.
The included software must be installed on the computer. Please read the
software description for more information.
1. Connect the meter to the computer via the USB cable., or Turn on the
Bluetooth connection.
2. Press the USB button (2.3) for two seconds; The data transfer is started.
3. Perform the measurements. The data is uploaded.
4. Press the USB button for 2 seconds; The data transfer is terminated.
Install software "MeterView"
Android
(iOS not available)
1. Call meterview.apk from the included CD.
2. Connect your Android mobile phone to your PC via a USB cable.
3. Copy meterview.apk to the mobile or the SD memory.
4. Start the file and use MeterView.
Using "MeterView"
For the use of the software please refer to the instructions on the PC or the
mobile app.
1. Open the MeterView-APP.
2. Turn on the PAN 188.
3. Press USB (2.3) 2 seconds-the USB icon will appear in the display and
the data transfer will start.
4. Start the APP and select the Bluetooth icon at the top left. Then
connect to "MultMmeter-001".
5. On successful connection, the MeterView-APP starts, receives the
measurement results from the PAN 188 and displays them on the
"MeterView application page".
39
English