Publicité
All manuals and user guides at all-guides.com
17
www.mopar.com
4. TEMPORARY REMOTE START OVERRIDE
a. From the ECU list or Topology Screen, select "BCM"
b. Select "MISCELLANEOUS FUNCTIONS" tab
c. Select "TEMPORARY REMOTE START DISABLE AND ENABLE FUNCTIONS"
d. Following the prompts, verify the remote start is enabled
5. CLEAR ALL DTCs
a. Cycle ignition to the OFF position
b. Start the engine and turn the steering lock to lock
c. Cycle iginition off then cycle to the ON/RUN position (do not start engine)
d. Check for any DTCs
e. Clear all DTCs
6. TEST THE REMOTE START
a. With the vehicle off, doors closed and locked and hood closed, verify the remote start is functioning properly
7. CUSTOMER INFORMATION CARD
a. Place Customer Information Card (K) on front passenger seat
3-29-18
K6862801
Publicité
