Klarstein 10031904 Mode D'emploi page 20

EN
20
All manuals and user guides at all-guides.com
BULB AND LAMP REPLACEMENT
Replacing Bulbs
• Switch the unit off and unplug the appliance. Remove the lamp cover by unscrewing
the 2 screws.
• Unscrew the incandescent bulb. Replace with the same type and rated bulb:
Incandescent Bulb E 14: max 40 W
Replacing Halogen & LED Lamps
• Disconnect the light wiring point which is located within the hood, (behind the
grease filer).
• Then use a screw driver remove the bulb holders and wiring from the hood. Replace
with the same type and rated lamp:
Halogen lamo: max 20 W
LED Lamp: max 1.5 W