Craftsman 919-724122 Manuel D'instructions page 3

Model No.
Running HP
Bore
Stroke
Voltage-Single Phase
Minimum Branch Circuit Requirement
Fuse Type
SCFM @ 40 psig
SCFM @ 90 psig
Refer to Glossary for abbreviations
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these sections.
situation which, if not avoided, will
result in death or serious injury.
which, if not avoided, could result in
death or serious injury.
IMPORTANT SAFETY INSTRUCTIONS
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm. Some example of
these chemicals are:
•
lead from lead-based paints
•
crystalline silica from bricks and cement and other masonry products
•
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, always wear MSHA/NIOSH approved, properly fitting
face mask or respirator when using such tools.
When using air tools, basic safety precautions should always be followed to reduce the
risk of personal injury.
SPECIFICATION CHART
Indicates an
imminently hazardous
Indicates a potentially
hazardous situation
919-724122
1.3
1-7/8"
1-1/4"
120
15 amps
Time Delay
4.9
3.5
.
which, if not avoided, may result in
minor or moderate injury.
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
3- ENG
Indicates a potentially
hazardous situation
Used without the
safety alert symbol
A08601