Create PIZZA MAKER PRO 12 Manuel D'instructions page 9

All assembly and maintenance must be carried out by a qualified professional, please con-
tact after-sales service.
Before assembling the oven, make sure all parts are present. If any parts are missing or dam-
aged, do not attempt to assemble the appliance. Contact customer service for replacement
parts.
1. Unfold the legs.
2. Enter the stone firing table.
Insert the stone with a slight upward inclination, from the bottom, until it fits inside the oven.
3. Connect the gas hose to the pizza oven.
Connect the gas hose to the inlet pipe and secure it using a metal clamp.
MOUNTING
Pushing with your
through this hole you will lift
the stone to be able to remove
it more easily.
E NGLI SH
finger,
9