Publicité
Les langues disponibles
Les langues disponibles
20 electrolux
6) place the door on a stable surface (Fig. 4) protected by
a soft cloth to prevent the handle surface from being
damaged;
7) release the locking system to remove the internal
panes of glass (Fig. 5);
8) turn the 2 fasteners 90° and extract them from their
seats (Fig. 6);
9) gently lift and carefully take off the uppermost pane
marked by a decorative frame on 4 sides (Fig. 7).
Clean the oven door with lukewarm water and a soft cloth.
Do not use products such as scouring pads, steel wool,
abrasive sponges or acids because they could damage
the special heat-reflecting surface of the internal panes of
glass.
After cleaning, reassemble the panes in the door and then
the oven door, following the procedure described above
in reverse. Make sure you reposition the panes correctly.
To perform this operation correctly, proceed as follows:
- the decorated internal pane with a frame on the 4 sides
must be reassembled so that the screen-printing is facing
outwards. The side of the pane of glass is correct if you
do not feel any roughness near the screen printing when
you pass your fingers over the surface.
20
All manuals and user guides at all-guides.com
Fig. 4
Fig. 5
90°
Fig. 6
Publicité
