ZANKER ZKB 7628 Informations A L'intention De L'utilisateur page 10

10 electrolux
"End of cooking" function
With this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
to select the "End of cooking" function. The relevant pilot
lamp will start flashing. Then, proceed as follows:
To set the End of cooking time:
1. Press button "
2. After the setting is carried out, wait for 5 seconds:
the "End of cooking" pilot lamp
and the display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
and the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will
start to heat again.
To cancel the End of cooking time:
1. Press button repeatedly to select the "End of
cooking" function. The relevant pilot lamp
flash and the display will show the programmed
End of cooking time.
2. Press button "
current time of day. The programmer will beep and
the pilot lamp will go out.
"Cooking duration"
of cooking time"
The functions "Cooking duration" and "End of cooking
time" can be used simultaneously to set the oven to switch
on and off automatically at a later time.
10
All manuals and user guides at all-guides.com
repeatedly
" or " ".
will come on
" until the display shows the
and "End
combined
will