Cafe C2Y366 Instructions D'installation page 10

3
INSTALL ANTI-TIP DEVICE
be secured by a properly installed anti-tip bracket. See
installation instructions shipped with the bracket for
complete details before attempting to install.
To check if the bracket is installed and engaged
should be inserted into the opening on the anti-tip brace
on the range. If the bracket arm misses the brace to the
always repeat this procedure to verify the range is
properly secured by the anti-tip bracket.
to receive one at no cost.
If the anti-tip device supplied with the range does not
WB2X7909.
Read the AHAM Anti-Tip Safety Brochure packed with
the bracket.
Anti-Tip Parts Provided
4 Wood Screws
Anti-Tip Brace
10
Installation
WARNING
• A child or adult can tip the range and be killed.
• Install the anti-tip bracket to the wall or floor.
• Engage the range to the anti-tip bracket by sliding the
range back such that the foot is engaged.
• Re-engage the anti-tip bracket if the range is moved.
• Failure to do so can result in death or serious burns
to children or adults.
NOTE: This anti-tip device may be installed on the
opposite side of the range.
Anti-Tip Bracket
For Concrete or Cement Construction: You must use
appropriate fastening hardware (not provided).
AHAM Anti-Tip
Safety Brochure
Tip-Over Hazard
through the brace and into the range.
Alternate Brace
Position
from the left (or right) side of the installation location.
to Dimension A.
at the marked location. Mark screw holes for fastening
the bracket to the wall sole plate and the floor.
2 wood screws (provided).
Range A
A
Anti-Tip Brace
Anti-Tip Bracket
Wall Sole Plate
31-2000815 Rev. 1