Safety Information; Proper Use; Technical Data; Before Starting The Equipment - EINHELL BT-GG 200 P Mode D'emploi

Anleitung_BT_GG_200_P_SPK1:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person
who is responsible for their safety or they have
received instructions from such a person in how to
use the equipment safely. Children must always be
supervised in order to ensure that they do not play
with the equipment.
2. Layout (Fig. 1)
1 Nozzle
2 Support stand
3 Trigger lever
4 Glue stick
15.09.2008 17:22 Uhr Seite 7

3. Proper use

You can use the hot glue gun to glue the following
materials: Wood, plastics, textiles, cardboard,
ceramics, leather, etc.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains connection 230 V ˜ 50 Hz
Power rating 12 (72) W
Heating time approx. 5 mins
Melting temperature approx. 110 °C
Operating temperature approx. 150 °C
Glue stick Ø
Weight
Totally insulated

5. Before starting the equipment

Fit the support bar the to the front of the hot glue
gun. Fold the support bar forward so that it engages
securely in the front position, before you insert the
plug into the socket.
Only place the hot glue gun on non-flammable
surfaces.
6. Starting up
Push the glue stick into the hot glue gun as for as the
stop. Now plug the mains plug into the mains socket
outlet. The hot glue gun is ready for use after a
heating time of approx. 5 minutes.
GB
11 mm
0.25 kg
II /
7