11. MOUNTING OVEN TO THE WALL
Two people are recommended to attach the Microwave
Oven/Hood to the Mounting Plate.
1.
Thread the Power Supply Cord through the hole
made in the bottom of the top cabinet. Install the
oven by snapping it onto the Mounting Plate. See
Figure 23.
Figure 23
2.
Use two Tapping Screws
that are on the bottom of the oven. See Figure 24.
Figure 24
Install grease filters.
3.
Use two Top Cabinet Screws
Washers 5, supplied in the INSTALLATION
HARDWARE, to attach the unit to the top cabinet.
See Figure 25.
Figure 25
5
All manuals and user guides at all-guides.com
Models MWOR530A2ASS, MWOR530A3ASS
4 to secure the levers
3 and two Flat
3
4.
Attach the bottom sash
the two tabs into the rectangular openings located
on the bottom front of the oven. See figure 26 (A).
5.
Use 5 Tapping Screws 4 x 12 mm
INSTALLATION HARDWARE and tighten into place.
See Figure 26 (B).
Figure 26
(A)
(B)
(B)
(B)
Metal Insert
NOTE: Metal insert must be positioned in bottom sash
before mounting as illustrated.
CHECKLIST FOR INSTALLATION
1. Make sure the unit has been installed according to
all of the Installation Manual and the Wall and Top
Cabinet Templates.
2. Plug in the power cord.
3. Keep the Use & Care Manual and Installation
Manual.
Installation Manual
ENGLISH
" to the oven by sliding
4 from the
(A)
(B)
(B)
Bottom Sash
9