Publicité
Les langues disponibles
Les langues disponibles
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to the
"Installation" chapter.
9. NOISES
CLICK!
BLUBB!
10. TECHNICAL DATA
The technical information is situated in the
rating plate on the internal side of the
appliance and on the energy label.
11. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance
for any EcoDesign verification shall be
compliant with EN 62552 (EU). Ventilation
requirements, recess dimensions and
minimum rear clearances shall be as stated
3. If necessary, replace the defective door
SSSRRR!
Voltage
Frequency
in this User Manual in "Installation". Please
contact the manufacturer for any other further
information, including loading plans.
gaskets. Contact the Authorised Service
Centre.
BRRR!
HISSS!
230-240 V
50 Hz
ENGLISH
83
Publicité
