Publicité
Les langues disponibles
Les langues disponibles
Under "FORCED PUMP OPEN" page, press "▲" or "▼" to select item and press " ◄ " or " ► " to
set value. Press "
be controlled by the wired controlled. Display as above.
Under "INV PUMP OPEN" page, press "▲" or "▼" to select item and press " ◄ " or " ► " to set value.
Press "
" to confirm or "
Note: Can only be set under a single pump ,The setting range of RATIO-PUMP is 30%-100%. It should
ensure its flow meet the requirement of whole unit, otherwise the unit may be damaged.
Under "PUMP CONTROL" page, press "▲" or "▼" to select item and press " ◄ " or " ► " to set
value. Press "
Parameter setting requirements are as follows:
PUMP ON TIME
PUMP OFF TIME
" to confirm or "
" to back.
INV PUMP SETTING
SELECT ADDRESS
SWITCH ON THE
PUMP
RATIO PUMP
OK
" to confirm or "
PUMP ON/OFF TIME
PUMP ON TIME
PUMP OFF TIME
OK
Set range Default value Adjustment range
5~60min
0~60min
" to back. If the unit at that address is ON, the pump cannot
07
#
NO
100
#
" to back.
05
MIN
05
MIN
5
0
24
5
5
V.1
Publicité
