Johnson GLACIARCP Guide D'utilisation page 65

3.4 Menu Setting
When the wired controller is unlocked, press "
MODE
USER MENU
SERVICE MENU
PROJECT MENU
OK
The default selection is "MODE" and choose the menu you need by pressing "▲▼" . Press
" " to enter its submenu or back to homeage by "
operation for 60s under menu page.
Note: the mode menu is invalid when the unit is controlled by modbus or host computer and
display as above.
4.3.6.1 USER MENU
Select "USER MENU" to enter the user menu. The interface display is as follows:
USER MENU
QUERY
TIMER
GENERAL SETTING
DOUBLE SETPOINT
OK 1/2
" to enter menu setting page as follows:
MODE (DISABLE)
USER MENU
SERVICE MENU
PROJECT MENU
OK
". Back to homepage if there is no
USER MENU
SNOW-BLOWING SWITCH
SILENT SWITCH
DHW SWITCH
OK 2/2
8
V.1