Fox Carp Plus X Instruction Pour Le Montage page 4

Assembly
GB
Instructions
Unfold all poles and
join together, lay out
dome flat on ground
as shown, push poles
A & B ( 2 longest -
Coded Yellow )
5
through flaps from
corner to corner and
pole C ( shorter -
Coded Red ) from
front to back (Fig.1).
6
All manuals and user guides at all-guides.com
POLE A (Yellow)
POLE B (Yellow)
POLE C (Red)
POLE D (Blue)
POLE B
1
Fig.1
4
Lift dome and bend poles, fit
pole ends in eyelets on corners
2
4 & 5 (Fig.3). Knot material ties
POLE C
over centre poles where they
cross each other (Fig.3A).
Thread pole D (Coded Blue)
3
through flap on outer skin. Now
stretch outer skin over inner
POLE A
dome making sure the pole is
to the front of the dome.
Fit pole ends into eyelets on
Fig.2
corner tags 1, 2 & 3 (Fig.2).
GB
Fig.3A
5
Fig.3
4