DeWalt DW738 Mode D'emploi page 18

E N G L I S H
BANDSAW DW738/DW739
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Voltage
(U.K. & Ireland only)
Power input
Cutting speed
Motor speed
Max. cutting height
Max. cutting width
Table size
Table inclination
Overall height
Overall width
Overall depth
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW738/DW739
D WALT declares that these Power Tools have been designed in
E
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
refer to the back of the manual.
en - 1
All manuals and user guides at all-guides.com
WALT one of the most
E
DW738 DW739
V 230 230
V 230/115 230/115
W 760 760
m/min 330/800 330-800
min -1 2,800 2,800
mm 155 155
mm 310 310
mm 380 x 380 380 x 380
0 - 45° 0 - 45°
mm 970 970
mm 510 510
mm 660 660
kg 23 23
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
WALT at the address below or
E
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to DIN 45635:
L (sound pressure)
pA
L (acoustic power)
WA
en - 1 * at the operator's ear
en - 1
Take appropriate measures for the protection of hearing if the
en - 1
en - 2 sound pressure of 85 dB(A) is exceeded.
en - 3
Weighted root mean square acceleration value according to DIN 45675:
en - 3
en - 3
en - 3
en - 3
en - 4
en - 5 TÜV Rheinland
Sicherheit und Umweltschutz GmbH
en - 5
Am Grauen Stein
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
Safety instructions
When using Power Tools, always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock
and personal injury. Read the following safety instructions before
attempting to operate this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose Power Tools to humidity. Keep work area well lit.
Do not use Power Tools in the presence of flammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces (e.g. pipes, radiators,
cookers andrefrigerators).
For use under extreme conditions (e.g. high humidity, when metal
swarf is being produced, etc.) electric safety can be improved by
inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.
4 Keep children away
Do not let children come into contact with the tool or extension cord.
Supervision is required for those under 16 years of age.
5 Extension cords for outdoor use
When the tool is used outdoors, always use extension cords intended
for outdoor use and marked accordingly.
DW738
dB(A)* 86
dB(A) 94
DW738
-
Cert. No.
950022453
DW739
86
94
DW739
-
11