TROUBLESHOOTING
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this Owner's Manual, should be performed through
your local LGE service center.
WARNING
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical
shock or personal injury.
PROBLEM
Vacuum cleaner will
not run
Poor suction
LED on the hose is lit
Indicator
Unit runs louder than usual
22
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
• Unplugged at wall outlet
• Hose is not connected to
the body properly
• Dust tank improperly
installed
• Clogged hose, wand,
nozzle
• Full or clogged dust tank
and filters
• Dust tank improperly
installed
• Clogged hose, wand,
nozzle
• Dust tank is full
Indicator
• Power is on without dust
tank
• Rotating plate in the dust
tank is restricted because
of obstruction
• Clogged hose, wand,
nozzle
POSSIBLE SOLUTION
• Make sure cord is plugged into a
functioning outlet.
• Remove the hose from the body and
reconnect it properly.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Empty dust tank and clean filters.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Empty dust tank
• Reattach dust tank
• Remove obstruction.
• Check for clogs.