Publicité
Les langues disponibles
Les langues disponibles
6. Lower the agitator into place, making sure the
oval shaped tabs fit into the indents on the head.
7. Reinstall the agitator brush cover.
All manuals and user guides at all-guides.com
Removing Clogs
WARNING
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
If you notice a loss in suction, first check the filters
as described on page 16. If the filters are clean,
there may be a clog. The arrows show areas where
clogs are most likely to occur.
To check for clogs:
1. Check the hose where it connects to the canister
by pressing the release button on the top end of
the hose.
Fitting pipe
Flexible Hose
2. Check the power nozzle where it connects to the
wand by pressing the power nozzle release
pedal.
3. Remove the dust separator and check the dust
separator inlet where it connects to the canister.
CARE & CLEANING
Release Button
19
Publicité
