FUXTEC FX-AF1196 Mode D'emploi page 60

All manuals and user guides at all-guides.com
Original-Bedienungsanleitung FUXTEC FX-AF1196_de_en_fr_ita_rev02
7.6.4 Adjusting the belt tension
1 Bracket
3 Reverse cable
5 Lower lock nut
Proper belt tension is critical for good work performance. After half an hour
of operation, all belts may need adjustment due to initial stretch. After that,
you should check the tension after every 2 hours of operation.
To increase the belt tension:
Loosen the upper jam nut and unscrew the nut.
•
Tighten the lower lock nut.
•
Check the adjustment.
•
This process can be repeated until the tube
adjustment screws are fully adjusted. If no further adjustments can be
made, the belt must be replaced.
60
2 Forward cable
4 Upper lock nut