Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Original-Bedienungsanleitung FUXTEC FX-AF1196_de_en_fr_ita_rev02
7.6.1 Wheel lock pins
Move wheels to milling position:
•
Remove locking pin. Align the hole in the axle with the hole in the
wheel hub.
•
Insert the locking pin through the holes and attach the locking pin
ring to secure the axle's pin.
•
Lock the wheel and axle firmly together before milling.
•
Repeat for the other wheels.
NOTE: Always have both locking pins inserted or pulled out. Do not operate
the router with only one wheel secured.
Move wheels to freewheel position:
•
Remove locking pin. Push the wheel inward toward the device.
•
Insert the pin into the axle only.
•
The wheel should be able to rotate freely on the axle.
7.6.2 Height adjustment of the handlebars
The ideal height of the handlebar depends on the operator size and the
machining depth.
Adjusting the handlebar:
•
Loosen the nuts and remove the top bolts on each side.
•
Align the handlebar with the desired holes.
•
Replace and tighten the bolts and nuts.
A Locknuts
B Height adjustment screw
C Holes for height adjustment
D Transmission cover
58
Publicité
